Yet another Micro Balun case for QRP Ham Radio
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another balun case design. Many of the kits online were large in size, built for 100 watts. I run a 10w QRP radio…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Yet another balun case design. Many of the kits online were large in size, built for 100 watts. I run a 10w QRP radio for SOTA activations and have a zest for keeping things as small as possible. This was designed for a FT-82-43 Ferrite, and a BNC bulkhead connector. In the cap of the case, snip off and insert one of these terminal strip blocks into the top. bottom screen should tighten on the output of your balun winding, and the top to your wire antenna: https://www.amazon.com/dp/B0BVFMZS4Q
Works great for 9:1 and 49:1 baluns.
Designed in OnShape, and available here: https://cad.onshape.com/documents/55d5582d6fd3b6bb2c7857a9/w/be77346a938d9df5927bf8d6/e/12eb6d09a8d0589a21cb0b40
Category: Electronics