1 / 6
Yet another Micro Balun case for QRP Ham Radio — zdjęcie 1
1 / 6

Yet another Micro Balun case for QRP Ham Radio

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another balun case design. Many of the kits online were large in size, built for 100 watts. I run a 10w QRP radio…

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Yet another balun case design. Many of the kits online were large in size, built for 100 watts. I run a 10w QRP radio for SOTA activations and have a zest for keeping things as small as possible. This was designed for a FT-82-43 Ferrite, and a BNC bulkhead connector. In the cap of the case, snip off and insert one of these terminal strip blocks into the top. bottom screen should tighten on the output of your balun winding, and the top to your wire antenna: https://www.amazon.com/dp/B0BVFMZS4Q

Works great for 9:1 and 49:1 baluns.

Designed in OnShape, and available here: https://cad.onshape.com/documents/55d5582d6fd3b6bb2c7857a9/w/be77346a938d9df5927bf8d6/e/12eb6d09a8d0589a21cb0b40

Category: Electronics

Tagi