Caframo Sirocco II / Sirocco 2 Fan Locking Plate Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable Sirocco II fan locking plate replacement. Fixes broken locking pins so the fan holds position again.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Replacement internal locking plate for a Caframo Sirocco II / Sirocco 2 fan that will not lock into position or swings freely.
The six small locking pins/lugs on my original plate had snapped off. I recreated and 3D printed the plate, installed it, and the fan now locks into position again.
IMPORTANT: This is the separate plate that fits onto the clawed end of the locking rod inside the fan mechanism. It is NOT the locking rod or handle.
Files included:
- STL model for 3D printing.
- Bambu Studio project file.
Recommended infill: 100%.
I printed mine using Bambu Lab PLA Basic in black. It came out very strong and worked perfectly in my fan.
Check your printer, nozzle, filament and slicing settings before printing the Bambu project. Compare the model with your original part before printing.
The files are free to download so other people can repair their fans rather than replace the entire unit.
Repair video:
The video shows how to remove the fan from its wall mount, open it up, remove the damaged locking plate and fit the replacement.
Disconnect the fan's power supply before removing or opening it. Keep track of the spring and other small parts.
This is a DIY replacement, not an official Caframo spare part. Successful operation in my fan is not a guarantee of long-term durability or suitability for every operating environment.
