1 / 3
Drawer Organizer Set - 4 Sizes, 1 to 12 Compartments - CC0 — image 1
1 / 3

Drawer Organizer Set - 4 Sizes, 1 to 12 Compartments - CC0

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Four divided storage bins for stationery, craft supplies and small parts. Print the size that fits your drawer.

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
50
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Public Domain

Sort paper clips, screws, beads and small essentials into fixed compartments. Four layouts are included: six wells (3 x 2), one deep well, a five-well long tray and twelve wells (4 x 3).

Overall dimensions, including walls and base:

Classic: 154 x 104 x 42 mm

Deep: 84 x 84 x 57 mm

Long tray: 224 x 64 x 32 mm

Small-parts grid: 184 x 144 x 37 mm

Suggested starting settings from the designer: PLA or PETG, 0.20 mm layers, three walls and 15–20% infill. Print base-down with the wells facing upwards; no supports are expected in this orientation. All four STLs generated toolpaths in PrusaSlicer. No physical print was performed. The 224 mm tray exceeds a 220 mm bed dimension when unrotated; allow room for your skirt or brim. It sliced successfully on a 250 mm square virtual bed.

Original designer: Julia MLT / julia_MLT (MyLaserTools). Original source: https://www.thingiverse.com/thing:7387326

The original, unchanged STL geometry is CC0 1.0 / Public Domain Dedication: https://creativecommons.org/publicdomain/zero/1.0/

Curated by JLJ Designs. We did not create the original geometry. Source credit is voluntary; the unchanged STL files remain CC0.

The gallery shows all four supplied layouts in digital views. Colours are illustrative.

Digital STL files only; no physical item or scene props are included.

Tags