Drawer Organizer Set - 4 Sizes, 1 to 12 Compartments - CC0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Four divided storage bins for stationery, craft supplies and small parts. Print the size that fits your drawer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Sort paper clips, screws, beads and small essentials into fixed compartments. Four layouts are included: six wells (3 x 2), one deep well, a five-well long tray and twelve wells (4 x 3).
Overall dimensions, including walls and base:
Classic: 154 x 104 x 42 mm
Deep: 84 x 84 x 57 mm
Long tray: 224 x 64 x 32 mm
Small-parts grid: 184 x 144 x 37 mm
Suggested starting settings from the designer: PLA or PETG, 0.20 mm layers, three walls and 15–20% infill. Print base-down with the wells facing upwards; no supports are expected in this orientation. All four STLs generated toolpaths in PrusaSlicer. No physical print was performed. The 224 mm tray exceeds a 220 mm bed dimension when unrotated; allow room for your skirt or brim. It sliced successfully on a 250 mm square virtual bed.
Original designer: Julia MLT / julia_MLT (MyLaserTools). Original source: https://www.thingiverse.com/thing:7387326
The original, unchanged STL geometry is CC0 1.0 / Public Domain Dedication: https://creativecommons.org/publicdomain/zero/1.0/
Curated by JLJ Designs. We did not create the original geometry. Source credit is voluntary; the unchanged STL files remain CC0.
The gallery shows all four supplied layouts in digital views. Colours are illustrative.
Digital STL files only; no physical item or scene props are included.