Cross-Stitch Boards - Round and Square, 100 mm - CC0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two perforated boards for stitching through printed holes: a round disc and square board, each 100 mm across.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 34
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Stitch directly through a regular grid of holes in these rigid printed boards. The package contains one circular board and one square board, each 100 mm across and 2 mm thick.
These are perforated boards, not adjustable fabric-tensioning hoops. Use needle and thread that pass freely through the holes. Suggested start: PLA, 0.16-0.20 mm layers, flat face-up, no supports. Remove small burrs before threading.
Original designer: Julia MLT / julia_MLT (MyLaserTools). Source: https://www.thingiverse.com/thing:7387829
Licence: Creative Commons CC0 1.0 Universal / Public Domain Dedication. Geometry is redistributed unchanged.
Curated by JLJ Designs / DROP_N_SMOKE. We did not create the original geometry. The gallery shows the supplied models in digital views. Colours are illustrative. Digital files only.