Cross-Stitch Boards - Round and Square, 100 mm - CC0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two perforated boards for stitching through printed holes: a round disc and square board, each 100 mm across.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Stitch directly through a regular grid of holes in these rigid printed boards. The package contains one circular board and one square board, each 100 mm across and 2 mm thick.
These are perforated boards, not adjustable fabric-tensioning hoops. Use needle and thread that pass freely through the holes. Suggested start: PLA, 0.16-0.20 mm layers, flat face-up, no supports. Remove small burrs before threading.
Original designer: Julia MLT / julia_MLT (MyLaserTools). Source: https://www.thingiverse.com/thing:7387829
Licence: Creative Commons CC0 1.0 Universal / Public Domain Dedication. Geometry is redistributed unchanged.
Curated by JLJ Designs / DROP_N_SMOKE. We did not create the original geometry. The gallery shows the supplied models in digital views. Colours are illustrative. Digital files only.