Drawer-cabinet door handles 128mm / çekmece-dolap kulpu 128mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pairable with every kind of furniture with screws 128mm apart/ Vida aralığı 128mm olan her türlü mobilyaya uygun.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Can be used with furnitures which has a screw hole 128mm apart. Holes for screws have a diameter of 3.6mm(hole is usable with screwes that have a diameter of 4,3.9,3.8,3.7) and depth of 20mm.
Printing vertical will give the best resolute.İt will be hard to screw for the first time.
Every design have a slight diffirance than other. Photo i added is not the 1/1 models.Forgive me for my bad grammar if i made a mistake. Make me know if there is a mistake with design.(İ will desing for 17cm and more stylish ones later)
Vida aralığı 128mm olan her tür mobilya ile kullanılabilir. Vida çapları 3.6mm( çapı 4,3.9,3.8,3.7 olan vidalarla kullanılabilir) derinlikleri 20mm.
Dik biçimde basmak en iyi sonucu verir.İlk kez vidalamak zor olacaktır.
Her tasarımın küçük bir farkı vardır. Eklediğim fotoğraf 1/1 model değildir.Eğer hatası varsa lütfen belirtin. (17cm için ve daha stil tasarımları sonra yapacağım)