Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Slim Top Case Modified GPIO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a bit more clearance on the GPIO cutout so that a STMicroelectronics TPM evaluation board could be plugged in
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This version takes the already excellent slim version of the Malolo snap fit case for Raspberry Pi 3 and makes a slight modification to the GPIO cutout. I am experimenting with a TPM 2.0 evaluation board manufactured by STMicroelectronics (KTPM-RASPIZA9) which has the PCB overhanging opposite to many standard Raspberry Pi HATs.
The original slim top case was perfect except for the fact that the evaluation board has a small tactile switch mounted to the underside of the PCB which is used to reset the TPM module. The original case would activate this switch when the board is installed.
So I made a simple adjustment to the GPIO cutout to eliminate a portion of the GPIO cutout top edge and eliminate the tactile button interference.