Ruger Mark III Tactical Solutions Pac-lite Picatinny Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These files are to add a Picatinny rail to a Ruger Mark 1,2,3 Pac-lite Barrel.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
These files are to add a Picatinny rail to a Ruger Mark 1, 2, 3 Pac-lite Barrel. This may also work on a Mark 4, but I don't have one to test. Included is 2 variations. A short version, attached to the barrel at 1 point, and a long version attached at 2 points. Either version is extremely strong, and utilizes an existing threaded hole on top of the barrel. The long version is stronger and has additional Picatinny mounting grooves.
The threaded hole on the top of the barrel is a #6-48 screw. I used one that was included with the rail mount for the original gun barrel.
Print Settings:
I printed in PETG-CF
6 Perimeters
60% infill
Gyroid Infill Pattern
Auto Tree Supports
Printed with the surface facing the front off the barrel to the print bed. (See Picture)
This is a very snug fit, and may require a bit of sanding to get it to slide on depending on your printer.