1 / 5
Label Roll Holder 140mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Label roll holder for thermal printers 140mm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Label roll holder designed for thermal printers. The horizontal beam is divided in half along the longitudinal axis to allow printing flat on the bed without supports.
Dimensions
Horizontal beam: 140 mm
Vertical limiter: 110 mm
Required hardware for assembly
2 × M3x4mm screws
2 × M3 nuts
Print instructions
Orient all three parts flat on the build plate as shown in the slicer screenshot. No supports are required. Assemble the two halves of the beam using the M3 screws and nuts, then slide the vertical limiter onto the assembled beam.