Arrma Grom Extended Battery Latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
taller battery retainer latch for the Arrma Grom series of RC cars
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I picked up an Arrma Gorgon Grom (or 2, or 3...) from the HobbyTown sale. Hard to beat for $99. But the Spektrum 2S 1400 mAh battery that came with it rarely lasted a full 20 minutes. So, I found that Ovonic makes a 3200 mAh battery that fits just fine, but its a little taller. So, I designed this battery retainer with a taller arm on it to hold in the taller battery. I only did the front battery retainer arm because in mine, i just routed the wires under the rear retainer and it holds it all down just fine. If you want a front arm too, just mirror the part in your slicer and print a mirror imaged part. This part is designed to use the same screw that the original arm used. No need for a longer screw. It is designed to be printed in the orientation shown. I included STEP file as well, in case you find another battery that works, but is a slightly different height and you want to adjust the model.
Enjoy!