Counting matching models…
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
As all the other battery holders did not seem to work for me I made my own. V1: has hooks to hold on to the frame. V2: slides ove the frame so won't pull off in a crash.
Want to add more capacity to your Zius Mags but don't want to cut the stock spring rest, try this piece! Add a pop of color to your mags and raise the capacity from 12 to 15. Can hold more but wouldn't recommend it. Make sure the first…
Simple remix of the original allowing you to run your tubes closer together. I remixed in Prusaslicer using negative volumes. Includes both sides of the holder
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Caja con tapa y soporte de Powerbank para integrar la placa ESP32Steamakers con modulo Lorawan y pantalla 1,3 OLED de Innova Didactic/Keyestudio. Tambien para pantalla OLD 0.96" Nota: El soporte para la Powerbank necesita soportes para su…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
This is a mount to slide your 2S pack onto the TC-18. The rubber pad has do be applied to keep them firm in place. Watch it in my short showcase
This is a 2S battery setup for my Skyzone Cobra FPV goggles. I've mounted it to the back of the standard head strap, which I've found to be the most comfortable arrangement. The battery case is designed with a groove for easy attachment.…
Small sturdy travel case for the DJI mini. Holds the drone, and remote tightly. Tested with the DJI mini 4k, but should also fit the mini 2, and mini 2SE. Ideal for travel. Can be printed without supports, print with 5-10% infill.
Ce conduit de refroidissement personnalisé améliore le flux d’air autour de la buse pour la Comgrow T500 équipée de l’extrudeur Biqu H2 V2S . 👉 Le support intègre un positionnement optimisé pour le probe de nivellement automatique (type…
I love to fly Tiny/Cine Whoops and the small lipo batteries can easily get damaged or lost when not in use. These have been handy and quite rugged! There are options for 1 - 3s sizes. I will be adding more variants as well. I printed them…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
I made this cap/protector that is held in place by 1in/25mm velcro strap on a LiPo pack. I prevents the balance connector (Microfit 3.0, 16P) from dangling and getting snagged when not in use. This is perfect for RC helicopter (true) 12S…
You will need: 4 M3*8 screws. An IPX/UFL to SMA connector. A 0,96 inch OLED display. The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set. 4 wires and a soldering iron for connecting the display. Connect the…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This K-2SO model captures the essence of the reprogrammed…
The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.
Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…
Screw caps to make your H2D / H2S / H2C / P2S/X2D look more refined. PLA works the best and there are no issues when printing with high-temp materials. Please note that my main platform is MakerWorld, where you can find more of my work:…
Gridfinity 4x3x6U P2S toolbox w/ tray insert. This is a modified version of my A1/A1 Mini insert. I believe P2S and H2 series use same hotend, so this should work, except for the silicone sock which H2 Series is different. As for the…
ENDER 5 (Pro) BIQU H2 V2S MOUNT v4.20 - - - NOT FINAL RELEASE - - - Modeled as a personal design challange. The model is designed with the intent to use all the original fastening points on the cartridge for stability. This model is…
Overview: I bought the Traxxas BL-2S system from my local hobby shop thinking that it would fit. Boy, was I wrong. In an effort to save myself some money, I used my CAD skills to accommodate the larger motor. The parts bolt to the chassis…
Highly recommended to Use ABS filament. You gonna need a hardware 8pc M4x10 or 12mm bolts 8pc M4 lock washers or a locktight 8pc M4 nuts
Recommended print settings for PETG parts Layer height: 0.2 mm Infill: 20% Infill pattern: Grid Perimeter: Min. 2 First and last layer: Min. 3
This model is made to adapt the filament sensor with Prusa MMU2S and Bondtech extruder. Just mount the filament sensor circuit board upside down and mount the adapter on top of it. I used a heat set insert (Tappex Microbarb M5) to screw…
Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…
🧹 Cleaning Tool for P2S A practical cleaning tool designed for Bambu Lab P2S (and compatible parts), created to make it easy to remove leftover filament, dust, and debris from hard-to-reach areas. The model is easy to print , durable, and…
Case for Digilent Pmod I2S2, uses two M2.5 screws and nuts. No supports needed, will probably print fine with whatever filament/layer height you feel like using. Note that the pins are slightly recessed into the case, so depending on the…
A remix of @AzJake DJI Air2/Air2S mount, modified for usage in the Multiboard system. It requires 4 raised snaps and 1 20mm small thread T-Bolt, and a M3 bolt and nut (don't remember the size). It's recommended to print a T-Bolt tool in…
Motivation After years of happily working with the Lack Enclusure and juggling with the aluminium tubes falling out of the spool holder when changing spools, I finally took some time to design TPU stoppers for the 8mm aluminium tube used…
This filtration kit was specially designed for the Bambu Lab P2S to effectively reduce fine particles and odors emitted during 3D printing, especially when using technical filaments (ABS, ASA, Nylon, PC, etc.). The concept remains simple…
I wasn't a fan of the available PCB mounts and strain relief options for the O2S Toolboard and Orbiter so I made this when putting together my custom sidepack crucible printer. Simple and works well. I've provided the original solidworks…
Printed with ABS. 4pcs M2x3 wafer head Screw 4pcs M2 Nut some 7x0.2mm Nickel Plated Steel Strip 2pcs M3x20 screws 2pcs M3 brass inserts (or print "18650x2_v4_case_plastic_taping.stl" and tap thread in plastic) Covers just glue after…
Fan model: Delta BFB1012SHA01 Screws: M2x6 11 pcs. M3x16 3 pcs. I also added a model in STEP format.
Remix of a Remix of a Remix..... See explanation below.. :)
This poop basket doesn’t extend beyond the printer’s overall dimensions, so the printer can be placed flush against the wall. Two m3 bolts (11-12mm) are needed to attach the base to the printer. The container then slips onto the base with…
Bambu Lab P2S Silicone Foot Mold / Vibration Dampener Mold This is a 3-part casting mold designed specifically for the Bambu Lab P2S 3D printer feet. Important Note Please note that my Bambu Lab P2S printer has not arrived yet , so this…
do not print the mk1 rotator.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I found a similar model, but it was too complicated, too…
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…
For fixing a hanging thumb button I needed to open up my mouse. Ever since the sliding pads have been mildly infuriating; hanging on my mouse pad and not staying flat/smooth. Printed using PLA with 0.4mm nozzle and 0.15 layer thickness.…
le Bord ne fait que 3mm de largeur Imprimez dans le filament que vous voulez
Idealweise druckt man das Zahnrad natürlich in Nylon. Bei so einem kleinen Teil ist das oft auch relativ problemlos möglich. Auch in PETG sollte es aber funktionieren. Oft ist das innere Loch nach dem Druck durch Verformungen nicht exakt…
Just remade some frame caps which don't have the exact same pins as the Elegoo originals but these cover the bottom corners of the frames. remix them to your needs.
Provides support for O2S Toolboard
Nevermore Mini adapter for Bambu Lab H2S. Uses original screw mounting points on bottom deck. You need 2 heat inserts M3x5x4 (5mm(OD) x 4mm (L)) and 2 M3x8 screws.
I know the off-the-shelf cable tag integrated with a zip tie. But I wanted to save my money with my own zip ties. Prints in PLA. Labeled with TEPLA.
xTool P2S Adapter for TwoTrees Honeycomb Bed (600x300mm) This custom-designed mount adapts a 600x300mm honeycomb panel to fit perfectly inside the xTool P2S laser cutter. The Problem and Solution When cutting materials like acrylic on the…
Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
BAMBU P2S Ikea Platsa FAN 120 cooling system and temperature controller. We all know that the printer inside the cabinet is fine, but the temperature inside is high. We need a system to lower that temperature, and we can achieve this with…
🔋 Ultra Lightweight 18650 2S2P / 4S Battery Holder This is a lightweight 18650 cell holder designed for high performance applications such as: • RC jets • FPV drones • Electric airplanes • Robotics • Compact high current battery packs The…
H2S Spaghetti Sentinel Guardian of the Purge. Keeper of the Noodles. Every Bambu H Series printer produces masterpieces. It also produces… offerings. Long, wiggly, slightly judgmental offerings. Enter the H2S Spaghetti Sentinel . This…
A simple 12 cell holder frame for 21700 lithium ion cells, designed to keep your pack organized and secure. It spaces and supports the cells for building custom battery packs, while maintaining good airflow and easy access for spot…
I created a filament holder for the H2S and H2D printers. If you don't like the original filament holder from bambulab, you can use this one, you can put a spool of filament on it or hang the filament on the side of the printer
tight tolerances, make sure your printer is properly calibrated, 0.2mm layer height friction fit for ESP32S3 and PCM5102, box clips together both usb ports and 3.5mm audio jack exposed
This is a remix of the Seeed XIAO ESP32S3 & Wio-SX1262 to mount the antenna vertically. No supports needed I added a light pipe and wall mount.
Simple filrst layer for Bambu Lab A1 V2 P1P P1S P2S X1 X1C X1E and easy access with pull tab, choose the printer sheet.
Depending on the filament and cell, 18.52 can be a bit tight. To add .1 mm of spacing, scale the original by 100.54 % (1.00539)
original PCB mounts have been added
Star Wars Bambu labs P2S door latches - may fit other bambus Please support me by following me
The best way to thank a designer is to post your build/make! Also see: The CFS Bracket is free in my other files for download! 🚀 Upgrade Highlights Purge System Upgrade (Clog-Resistant) Open chute design eliminates jams Easy front access…
Bambu Lab P2S Stepper Motor Covers Left and right side. With Bambu Lab logo cutout.
This one is less likely to bend and pull the wire out of the o2s board and also allows for use of wire sleeving and wire for supporting the umbilical due to the fact that it uses zip ties rather than a printed part to secure wire to…
Are you tired leaving your nails trying to remove the PTFE tube from your Bambulab 3D printer (and maybe others)? Give a try!
🚀 Eggtimer Quantum Avionics Bays (1.59", 2.26", 4") – Modular 2S LiPo Sled System A clean, modular avionics bay system designed specifically for Eggtimer Quantum altimeters . These sleds are built for reliability, ease of assembly, and…
printed in PETG 100% infill No supports needed scaling may be needed based on your printer's tolerances, this was printed on a mostly stock ender 3
This is a case for the NodeMCU ESP-32S development board by Ai-Thinker that can be mounted on an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Note: This was made for the Micro USB version of the board and…
slightly MAD is my version of MAD system for BIQU H2. Updates: 26.02.26: - Added the "Slightly_MAD_Mounting_Plate_MAD_Ender_3V2_universal" that should be compatible with different revisions of the X-Carriage bracket on Ender 3 V2 -…
Simple model to support the OMG V2s extruder in direct drive. -Print with supports on buildplate only. -Print in the same orientation the model comes in. You can put the motor connector facing down, I made room for it (plug the motor…
The U-2 Dragon Lady is a single engine reconnaissance aircraft used by the USAF. Following WWII, the U.S. found a need for a reconnaissance aircraft capable of flying over the Soviet Union untouched. The Lockheed Skunk Works U-2 Dragon…
Linear rail mount for the h2 (should work with both types) ive only tried H2V2S The adxl is attached with 3mm brass inserts Enjoy
Based on https://www.amazon.co.jp/Motors-Super-Power-Nema17-LDO-42STH48-2804AH/dp/B0CD1NMN5L
The Elegoo Neptune 2 had two variations of the X axis carriage plate. One had swept radii across the top, one had 50 degree angles. This is for the swept radii version. The other version I uploaded is for the angled plate. Installation…
UPDATE 7.1.25 Added interior model with pockets / hooks for zip ties to fix the light harness UPDATE 8.10.24 I created and added here an interior that is compatible with Trx 2-speed transmission - it has a “box” around it to accommodate…
The model MUST be printed in PTEG Works only with MGN12C Block The Model mount points are the same for the H2 and the H2 V2S You do NOT need to make modifications to the X Axis stop switch as this model accounts for it! This model is…
Il modello originale è perfetto e questo remix è solo un prototipo soggettivo non è ancora un modello definitivo, appena stampato il selettore originale mi è sembrato subito troppo massiccio ingombrante seppur non sono presenti viti.…
Not a cad expert. untested.
This piece acts as a spacer to sit on top of a 2S LiPo battery to make it the same thickness as a 3S battery, such that you can use the same length straps with both battery sizes. The spacer has built-in ‘shoulders’ that are spaced apart…
A display stand for the cheap yellow esp32-2432S028 with USB-C Category: DIY
Easy to print shroud for NH-L12s to improve exhausting hot air OUT of the case. Print in ABS/ASA or other heat resistant material. Requires spacer under power supply cable in order to fit, for example THIS (tested). 2025/02/14 - I've…
Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) for the alpine S2S69c
I was having problems getting my filament sensor to trigger consistently on filaments that ran a little thin (1.72mm) in spots, and after recalibrating repeatedly, I noticed that my filament sensor holder was leaning slightly to the left.…
those are combo lights brackets and spool holders that i made
Its a standard size buffer tube as the original one with the blaster is a little smaller then i'd like. Print with attachment point on the plate and print upwards. Good for getting some brighter colours on the blaster and its free. Use an…
This is a replacement spring disc located at the top of sailing winches Andersen Self tailing. Print with supports. PETG worked fine for me.
Base for sailing winch Andersen electric 1 speed version. this base is thicker than the manual version so it can accommodate the gearbox mounting plate which is 10mm thick. Printed in PETG with supports. As many perimeters as necessary to…
Base for Andersen winch 52ST. Printed in PETG with as many perimeters as possible to make it solid. no supports needed.
Remixed br41ndamage's files to apply the space for an Omron switch and 5mm bearing to the extended extruder mount. Print according to standard Voron print settings. Update:9/19/24 - new design as the original had too much clearance for…
I buying my cells and BMS on Akkuteile24.de. There are holes in the spacers for the cable connection to the BMS. BE CAREFUL WHEN YOU SOLDERING THE CONNECTION!!!!
![[NEW MODEL IN PROGRESS] aca hurricane for bambu lab p1s,a1,p2s,x1carbon,p1x.](https://media.printables.com/media/prints/55883b49-4d4a-468d-a4a6-6d6f6183a293/images/11966674_69c73a7e-5c14-4dd2-9835-69644495fba5_4653c231-e623-4181-b439-b9ea06d951a2/chatgpt-image-dec-21-2025-08_54_53-pm.png)
