1 / 4
ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the enclosure designed by @mdkendall, adjusted for the USB-C board version. Self-tapping version only.
- Rating
- 4.947 / 5
- Likes
- 127
- Downloads
- 1,746
- Makes
- 16
- Views
- 9,312
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites.
Model adjusted for the USB-C board version, which does have slight variations of the connector positions (especially mounting holes & USB-C connector).
Note: Self-tapping version only
Print settings
- Material: PETG
- PLA should be fine as well, probably with less flex on the buttons. The board gets warm on the back, but I don't think it's that warm to melt PLA.
- 0.4mm nozzle
- 0.2mm layer height
- 3 walls
- 2 is probably fine as well
- 15% infill or more
Required hardware
- 4x M3x6 Socket Head screw (self-taps into plastic)