18 models
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…
I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…
Full enclosure for the ESP32-2432S028R (CYD). Gives you access to most of the ports on the device and has flex tabs to press the buttons on the underside. Hardware needed (4) - M3 x 5mm x 4mm heat-set inserts (4) - M3x6 socket head cap…
This is a remix of the really nice case by @Dsk001 . The original can be found here Alien3D Deck This remix has changed the following: Changed to using inset M3x12 socket head screws Removed logo(s) (I needed a cleaner look) Cleaned up…
You don't need to use any thread inserts because board fits exactly. But you can use it and hide screws inside. Material: Whatever you want Infill: 5% Supports: NO
This is a custom-designed enclosure for the Sunton ESP32-2432S028R development board, a popular and affordable (~$8) module available on AliExpress, Banggood, and Amazon. The board features an ESP32-WROOM-32 module and a 2.8-inch 320 x…
Modified backplate with larger clearances
Desk stand for X-Touch using a ESP32-2432S028R. Use 4x12mm M3 screws to secure the front to the back. Use the USB cable connected to the supplied power cable to the ESP32-2432S028R (see photo).
Simple stand. Allows the ESP32-CYD to be placed vertically or horizontally. The bottom of the stand has a 10mm circular groove for placing a rubber pad.
Full enclosure for the ESP32-2432S028R. Gives you access to majority of the ports on the device and has tabs to depress the buttons on the underside. For the assembly you will need (4) - 3x5x5MM heat set inerts and (4) - M3x8 SHCS
The screen I bought for XTouch doesn’t match any of the revisions found online, so none of the existing cases fit. I combined and modified two designs I found, and ended up with this. Maybe it’ll be useful for someone. The enclosure was…
Requires four M3x12 socket head screws. These can easily be found on amazon or aliexpress and look like this:
Full enclosure for the ESP32-2432S028R. Gives you access to majority of the ports on the device and has tabs to depress the buttons on the underside. For the assembly you will need (4) - 3x5x5MM heat set inerts and (4) - M3x8 SHCS Both…
Case for USB powered cyd. Corners of the screen are slightly covered due to my desire to have rounded corners.
If you like my design and plan to download it, please show your appreciation by giving it a like!! SUMMARY / DESCRIPTION This 3D-printable, two-part enclosure houses an ESP32-2432S028R board (the "CYD" with a 2.8" resistive touch screen,…
Hey all! So this is a stand based around @ mdzi 's ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R) model to help enclose the display. I may have a few of them just mining away with an alternate NerdMiner OS. Is it a…
If you like my design and plan to download it, please show your appreciation by giving it a like!! SUMMARY / DESCRIPTION This 3D-printable, three-part enclosure houses an ESP32-2432S028R board (the "CYD" with a 2.8" resistive touch…
