1 / 6
Retro Case for YoRadio ESP32 with GC9A01 Round Display — image 1
1 / 6

Retro Case for YoRadio ESP32 with GC9A01 Round Display

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable retro case for YoRadio ESP32 with GC9A01 display and 50mm speakers. STEP files included.

Rating
0 / 5
Likes
2
Downloads
38
Makes
0
Views
286
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial

A retro-styled 3D printable case for the YoRadio ESP32 project with a round GC9A01 display.

Assembly

Multi-part case, assembled with self-tapping screws (M2x6 to M2.5x10, depending on the part) and cable ties for securing wiring/components.

Speakers

The build reuses components salvaged from a Bluetooth speaker, including 50mm speaker drivers. The speaker chambers are designed specifically to fit these 50mm speakers.

Variants

The case consists of multiple parts, three of which are available in different variants:

  • Front case — with a recess for the encoder's threaded nut, or without the recess

  • Frame — with anti-slip feet, or with recesses for 10mm round anti-slip pads

  • Back case — with a hole for a jack connector, or without 

Choose the combination that matches your build.

Files

Both STL and STEP files are included, so you can easily edit the model to fit your own components and needs.

What You'll Need

  • YoRadio ESP32 board

  • GC9A01 round LCD display

  • Two 50mm speaker drivers (e.g. salvaged from a Bluetooth speaker)

  • Self-tapping screws, M2x6 to M2.5x10

  • Cable ties

  • Screwdriver

  Note: I'm not a professional designer, so some part names used here (case front, frame, case back, etc.) are just my own made-up terms rather than official terminology ;)

Tags