Cocoa Press 1.0 to 2.1 Upgrade Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable parts for upgrading Cocoa Press 1.0 directly to 2.1, organized by upgrade-manual chapter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the 3D printable parts for upgrading a Cocoa Press 1.0 directly to Cocoa Press 2.1.
Assembly instructions: Cocoa Press 1.0 to 2.1 Upgrade Manual and kit resources.
Files and folders follow the chapters in the 1.0 to 2.1 upgrade manual. The C-number is the chapter number; an a after it identifies an accent-color part. Use Cocoa Press red for primary parts and Cocoa Press brown for accent parts.
Chapter 2 - Disassembly: 2 files
Chapter 3 - Hermit Crab: 2 files
Chapter 5 - Build The Extruder: 6 files
Chapter 6 - Electronics: 7 files
Chapter 7 - Screen: 6 files
Print quantities: Print two Belt Clips (C3a-Belt_Clip_x2), three Zip Tie Anchors (C7a-Zip_Tie_Anchor_x3), and one of every other part. The Power Inlet Bracket is optional if you retain the existing bracket.
C6-Lower_Center_Cover_Panel is the Cocoa Press 2.0 version specified for this upgrade. C7-Rear_Left_Base_rev2 is a new revision of the rear left foot. The file might not look exactly the same as the manual.
Suggested print settings: PETG; 0.2 mm layer height; 0.4 mm nozzle; 3 walls; 25% grid infill; 4 bottom solid layers; 5 top solid layers. Follow the manual for part orientation and assembly.