1 / 3
Ersatzbrücke für alten Hailo Dreifach-Mülleimer / Replacement Bridge for old Hailo tripple bin — image 1
1 / 3

Ersatzbrücke für alten Hailo Dreifach-Mülleimer / Replacement Bridge for old Hailo tripple bin

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ersatzbrücke zur Aufnahme des mittleren Eimers bei einem älteren Modell eines dreifach Hailo-Mülleimer.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Einer meiner ersten Versuche ... / One of my first tries ...

Bei unserem alten Hailo-Dreifach Mülleimer brach die Brücke auf einer Seite, in welchen der mittlere Eimer eingehängt ist.  Habe die Brücke entfernt, so dass an jeder Seite noch ein kleiner Stummel (5 mm und 10 mm) übrig war und die Ersatzbrücke dort eingesteckt und damit etwas verankert werden konnte.

Bitte vor Druck die Abmessungen prüfen. Beim Einstecken muss die eine Seite (5 mm Stummel) des Plastikrandes ein wenig nach außen gedrückt werden um die Brücke "einzurasten".

Gedruckt mit PETG auf einem Core One+. Erstellt mit OpenSCAD.

On our old Hailo triple bin, the bridge on one side broke, where the middle bin is hooked in. I removed the bridge, leaving a small stub (5 mm and 10 mm) on each side so that the replacement bridge could be inserted there and thus could be anchored a little.

When inserting it, you need to push one side (the 5-mm stub) of the plastic edge slightly outward to "snap" the bridge into place. Please check the dimensions before printing.

Printed with PETG on a Core One+. Made with OpenSCAD.