1 / 3
Friden STW-10 Replacement Power Plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses the original sockets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My original power cord crumbled, this is a replacement end intended to be used with a new power cord.
Cut the original plug end off and extract the sockets, drill out the old wires from the sockets and solder in the new cord's wires. Then fit them in, fill with epoxy and screw in with 12mm M3 wood screws.
This design does need to be revised in order to work better, the tolerance of the sockets is too tight and some other features could be improved but I already fit mine in and don't need another. I have included the FreeCad model so it can be reworked.