1 / 7
ASRock BC-250 AM4-AM5 CPU Cooler Mounting Plate — image 1
1 / 7

ASRock BC-250 AM4-AM5 CPU Cooler Mounting Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A custom CPU cooler mounting plate and optional backplate stiffener for the ASRock BC-250.

Rating
5 / 5
Likes
21
Downloads
110
Makes
0
Views
685
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Description

A custom CPU cooler mounting plate and optional backplate stiffener for the ASRock BC-250. This adapter is specifically designed for the Thermalright AXP120, but it should work with other CPU coolers that share the same mounting pattern.

 The mounting plate can be used with or without the backplate stiffener depending on your setup.

Achieved Temperatures

Thermalright AXP120 Heatsink + Generic Thermal Paste + Arctic P12 Max Fan, GPU: 40CU, 2000 MHz @ 960 mV, CPU 8/16 @ 3.6 GHz.
Stress Test - Furmark VK 1080p Full Load: 66-68 °C
Gaming - Black Myth Wukong Benchmark / Horizon Zero Dawn Benchmark: 53-55 °C

* Notes:
1. Important! Proper cooling of the VRM power delivery phases is essential. Make sure to attach small heatsinks to the MOSFETs and inductors as well as AMD Chipset, and ensure there is adequate airflow directed at them.
2. Using a phase-change thermal interface material (such as Honeywell PTM7950) could improve these temperatures even further.

Hardware

  • Nuts: 8 × M3

  • Bracket Screws: 4 × M3x10

  • Mounting Screws (Plate + Stiffener): 4 × M3x16 or M3x18

  • Mounting Screws (Plate Only): 4 × M3x12

Print Settings

  • 0.2mm layer height

  • 4 walls

  • 35-45% gyroid infill

  • 4-6 top/bottom layers

Recommendations

  • Print in a stiff engineering filament. ABS, ASA, or PET-CF are excellent choices.

  • Account for material shrinkage and printer calibration. Measure the mounting hole side of the plate with calipers — it should be around 7.4 – 7.8 mm.

  • It is highly recommended to use thread locker on the screws to prevent them from loosening over time.

Installation

  • Mount the cooler brackets to the 3D-printed plate.

  • Attach the plate (and optional stiffener) to the BC-250 board.

  • Mount the CPU cooler to the plate.

Disclaimer

This modification is done at your own risk. The installation procedure can damage the APU die. Proceed only if you are comfortable with that risk.

BC-250 Model Credit

@MandicReally. Thanks! <3

Tags