Box ESP32 S3 MCU W5500 Netwerk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottom case, top case, Button on/off, Stand , Tactile buttons fixation, all fits together to 1 box ,
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Box can be used without stand , the stand is made to fit under my monitor , the tactile switches are 12mm , the on/off button sits loose but function is good , the tactile buttons are fixed with own made bridge and can be soldered after installation , all fits together with screws 10-12 mm long and inserts (M3-4-4.2) . . Be free to use and adjust if you like , Good luck . Printed in PetG pro, with Cura and Elegoo Neptune 4 . only tactile button bridge and on/off button need support, all other can be printed without supports , i used 100% fill to make it strong , but that you can choose .