BC-250 "Pitman" Case with larger PSU / Power Relocation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to run the Pitman Case with a larger PSU and I also moved the power hook up to the front.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I wanted to run the Pitman Case with a larger PSU and I also moved the power hook up to the front. The parts can be mixed and matched with the original to achieve what you want.
Built for this PSU: https://www.amazon.com/dp/B0CWN59YCZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5
Disassemble the housing and reuse the thermal pads to sink the PSU with the back plate of the BC-250. Use insulating tape if needed or trim down some of the solder on the back side of the PSU to prevent any shorts (just be mindful of this).
