1 / 2
Lian Li Dan A3 3.5" HDD Bottom Mount Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to fit a 3.5" Hard Drive next to a 290mm 3 slot GPU
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
If you have a 3 slot GPU around 290mm you might struggle to fit the HDD under it. Therefore I have made this mount to place the Hard drive at the front of the case using the front most HDD/SSD holes and original mounting screws.
I printed with TPU 95a on 4 wall loops setting and 10% gyroid infill for good stability.
TPU works well for vibration absorption and makes the HDD much quieter. I haven't had any issues with it getting too hot and softening yet.
I have also tried it with PETG (which has better heat resistance) but does not absorb much vibration.