Lian Li Dan A3 3.5" HDD Bottom Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to fit a 3.5" Hard Drive next to a 290mm 3 slot GPU
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
If you have a 3 slot GPU around 290mm you might struggle to fit the HDD under it. Therefore I have made this mount to place the Hard drive at the front of the case using the front most HDD/SSD holes and original mounting screws.
I printed with TPU 95a on 4 wall loops setting and 10% gyroid infill for good stability.
TPU works well for vibration absorption and makes the HDD much quieter. I haven't had any issues with it getting too hot and softening yet.
I have also tried it with PETG (which has better heat resistance) but does not absorb much vibration.