1 / 7
Playseat Challenge Fanatec Pedals v3's Mount — image 1
1 / 7

Playseat Challenge Fanatec Pedals v3's Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I needed something to mount Fanatec V3s pedals on Playseat Challenge, so I came up with this design. I've printed this…

Rating
0 / 5
Likes
32
Downloads
495
Makes
0
Views
5,063
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

I needed something to mount Fanatec V3s pedals on Playseat Challenge, so I came up with this design.

I've printed this in PLA, but you could go with PETG for strength

There are 2 variants, one for M8 bolt since v3's has 8,5mm holes for mounting and smaller M6 because of COVID-19 no hardware stores are working and I had no M8 at home.

You need 4 sets of mounts for one Playseat Challange.

!You need to cut the foam to fit this mod!

Holes that Playseat pedal stand it going trough are slightly larger to accommodate TPU pad for better grip. The attached TPU_pad is 0.25mm and I have printed it in 2 layers but depending on your printer you will need to adjust the hight of the pad. I also have tried 0,15mm and 0,30mm but they were not a perfect fit. You can quickly make one in Thinkercad with a dimension of 62x39mm and your hight.

Hardware:

M6 x 40mm - 4pcz

or

M8 x 40mm - 4pcz

M3 x 30 mm - 16pcz

And nut for every screw

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Resolution:

0.2

Infill:

50-60%

Filament: DEVIL DESIGN PLA or PETG Black


Notes:

I've printed PLA with 6 walls all-round.

Category: Video Games

Tags