Pixel 8 case (NOT pro or 8a), TPU and PLA/PETG versions (and pixel 8 model)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for pixel 8 phones, one version for TPU and one for PLA or PETG. Also a model of the phone itself.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
I looked and was disapointed withthe models I found for my Piel 8.
I made a new one,. it's not special in any way shape or form, but it fits well.
The TPU versiion is similar to the cones you could buy, looks and fucntion wise. you need to use 94 a or harder, or else it'll simply be too floppy to be useful.
The pla version has slots on the permiter to allow minor stretching when putting it on, and no cover on the button. PLA is maybe a temporary solution as it doenst' have much give, PETG would be better. ... until you get yourseflf a tpu one.
You can print as is, with normal settings for your material of choice.
I myself printed them with 0 top and bottom layer, which exposes the infill.
The PLA version on the photos has 0 top#bottom what so ever. make it weird around hte lens.
TPU version has 0 top and bottom layers EXCEPT on the part around the phone lens, which I had printed with normal top#bottom layer amounts, using a modifyer). All this of course being done in the slicer... so you're on your own there depening on your slicer and skill level.
as a bonus, i 'm adding a PIXEL 8 phone blank, which I used to model around.
I am adding the fusion files for both models (itearations of each other) and the STLs
Please give it a like if you like it, even if you don't print it.