Tuning Parts with bearings for Heavy Duty Planetary Astro Tracker Gen 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My tuning set for the genius design of Heavy Duty Planetary Astro Tracker Gen 2. With these parts it runs very very…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 48
- Makes
- 0
- Views
- 994
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My tuning set for the genius design of Heavy Duty Planetary Astro Tracker Gen 2.
Remix from: https://www.thingiverse.com/thing:4889007
With these parts it runs very very very smooth and what you need is:
24 bearings 688 2RS 8x16x5 mm
I printed the gears with Extrudr GreenTec Pro Carbon, all other parts with Princore Carbon PETG, all parts are printed with a 0,4mm nozzle.
For the maximum stability, i printed with 100% infill.
You must calibrate your printer very well, then you get a really smooth Startracker with minimum play in the gearbox on RA and 0 play on the Axis.
The last Picture is my first shot on this tracking mount, i taken 15x 120s frames. The heavy load was a Canon EOS 700Da, IDAS LPS-D1 ClipFilter and a Sigma 18-35 f/1.8 by 18mm f/2.8 ISO/1600. All frames are good, no startrails. I`m very happy :)
Happy printing!