ToolkitRC M6D Charger & Power Supply Stacked Desk Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact stacked stand for ToolkitRC M6D charger and matching power supply. Improves screen angle and workbench airflow.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact two-tier desktop stand designed for the ToolkitRC M6D dual-channel smart charger and its matching power supply unit. By stacking the charger directly above the power supply, this stand reduces workbench clutter while angling the display and scroll wheel for better visibility and one-handed operation.
Features
Space-Saving Stack: Keeps the charger securely elevated above the power supply unit.
Ergonomic Viewing Angle: Tilts the M6D screen upward for easy viewing and menu navigation.
Unrestricted Airflow: Open-frame side cutouts ensure uninhibited intake and exhaust venting during heavy charging loads.
Full Connector Access: Leaves side output ports, balance leads, and rear input power cables fully accessible.
Stable Footprint: Designed to stay firmly planted when inserting or pulling XT60 plugs.
Recommended Print Settings
Material: PETG or ABS/ASA (recommended for heat tolerance near active electronics), PLA works if ambient temps are low
Layer Height: 0.20 mm
Wall Loops / Perimeters: 3–4
Top / Bottom Layers: 4
Infill: 20% (Gyroid or Grid)
Supports: Yes, required (support overhangs on bridge sections/openings; tree/organic supports recommended for easy removal and clean surface finish)