1 / 2
Healtech GIpro ATRE G2 Motorcycle Handlebar Mount — image 1
1 / 2

Healtech GIpro ATRE G2 Motorcycle Handlebar Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A rugged, custom-designed handlebar mounting bracket for the Healtech GIpro ATRE G2 Gear Indicator.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

A rugged, custom-designed handlebar mounting bracket for the Healtech GIpro ATRE G2 Gear Indicator. Specifically modeled to fit 25mm (1 inch) handlebars, making it ideal for cruisers, touring, and custom motorcycles.

Key Features

100% Support-Free Printing: Designed with optimized angles so it prints cleanly without any generated supports. Because of this support-free geometry, it is intentionally slightly thicker/beefier.
Weather & UV Resistant: Built for outdoor motorcycle use (use PETG as minimum requirement)
Easy Hardware Assembly: Uses standard M3.5 x 20mm self-tapping screws for secure clamping.
Modular Fit (If necessary): Sized for 25mm diameter bars, but the model/STEP files can easily be resized or modified in your slicer/CAD to fit other handlebar diameters (e.g., 22mm / 7/8" or 28.6mm / 1-1/8").

Note on Slimmer Variant: If you need a sleeker/thinner profile and don't mind using supports, feel free to leave a comment or request, and I can upload the slimmer modified version as well!

Technical Specifications

Compatible Device: Healtech GIpro ATRE G2 Gear Indicator
Handlebar Fitment: 25 mm / 1 inch
Hardware Required: 2x M3.5 x 20 mm self-tapping screws
Recommended Material: PETG, ASA, or ABS (PETG recommended for UV resistance, thermal stability, and flexibility outdoors)

Recommended Print Settings

Material: PETG (tested) or ASA
Layer Height: 0.20 mm
Perimeters / Walls: 3 – 4 (recommended for strong screw engagement)
Infill: 20% – 30% (Gyroid or Grid)
Supports: No (Designed specifically to print support-free)
Orientation: Place flat side down on the build plate

Tags