1 / 2
Spiral Vase - Nozzle Purge & Flower Vase (180mm) — image 1
1 / 2

Spiral Vase - Nozzle Purge & Flower Vase (180mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Elegant spiral vase that doubles as a nozzle purge tool. Print in vase/spiral mode for continuous single-wall extrusion

Rating
0 / 5
Likes
5
Downloads
15
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

Jarrón Espiral - Purga de Boquilla y Florero

Un jarrón funcional diseñado para extrusión continua. Perfecto para purgar la boquilla al cambiar de filamento.

IMPORTANTE - IMPRIMIR EN MODO ESPIRAL / MODO JARRÓN

Este modelo DEBE imprimirse en modo Espiral/Jarrón. Sin este ajuste, se imprimirá como un bloque macizo. Actívalo en tu slicer:

  • Cura: Modo especial → Espiralizar contorno exterior

  • PrusaSlicer: Capas y perímetros → Modo jarrón

  • OrcaSlicer: Calidad → Modo espiral (jarrón)

  • Creality Print: Ajustes especiales → Vaso en espiral

  • BambuStudio: Otros → Spiral Vase

El modo espiral hace que la impresora extruya una pared continua sin paradas, sin retracciones y sin viajes. Esto es lo que purga la boquilla y crea la forma hueca del jarrón.

Características:

  • 180mm de alto con perfil curvo elegante

  • Una sola pared continua (sin paros, sin retracciones)

  • Fondo cerrado (retiene agua con sellante)

  • Boca abierta para flores

Ajustes de impresión:

  • Modo de impresión: MODO ESPIRAL / JARRÓN (obligatorio)

  • Altura de capa: 0.2mm

  • Material: Cualquiera (PLA, PETG, Silk PLA queda genial)

  • Soportes: No necesarios

  • Boquilla: 0.4mm

Cómo purgar la boquilla: Carga el filamento nuevo, imprime este jarrón en modo espiral. La extrusión continua empuja todo el filamento viejo. Boquilla limpia + jarrón bonito.

Para que retenga agua: Aplica resina epoxi transparente por dentro después de imprimir.

Spiral Vase - Nozzle Purge & Flower Vase

A functional flower vase designed for continuous extrusion. Perfect for purging your nozzle when changing filament.

IMPORTANT - PRINT IN SPIRAL/VASE MODE


This model MUST be printed in Spiral/Vase mode. Without this setting, it will print as a solid block. Enable it in your slicer:

  • Cura: Special Modes → Spiralize Outer Contour

  • PrusaSlicer: Print Settings → Layers and Perimeters → Spiral Vase

  • OrcaSlicer: Quality → Spiral Mode (Vase)

  • Creality Print: Special Settings → Spiral Vase (Vaso en espiral)

  • BambuStudio: Others → Spiral Vase

The spiral mode makes the printer extrude one continuous wall without stops, retractions, or travel moves. This is what purges the nozzle and creates the hollow vase shape.

Features:

  • 180mm tall with elegant curved profile

  • Single continuous wall (no stops, no retractions)

  • Closed bottom (holds water with sealant)

  • Open top for flowers

Print Settings:

  • Print mode: SPIRAL / VASE MODE (mandatory)

  • Layer height: 0.2mm

  • Material: Any (PLA, PETG, Silk PLA looks great)

  • Supports: None

  • Nozzle: 0.4mm

How to purge your nozzle: Load the new filament, print this vase in spiral mode. The continuous extrusion pushes out all old filament. Clean nozzle + nice vase.

Water-tight tip: Apply clear epoxy resin inside after printing.

15:50


Tags