48 models
Shelf for Ikea Skadis board that can be assembled into continuous row and uses relatively small amount of filament. Printing Print without supports, take care not to place the bracket on the print-bed with the hooks overhanging. Assembly…
Can be used to start growing basil and chili and other plants which need a lot of water at the start. When reloading a bottle make sure you are quick - it will be sealed quickly (a solution will be added soon - check out Update 1) Print…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
This is a REMIX of the original for a solid and larger shelf, while still allowing flexibility in combining multiple prints into one large continuous shelf. I also added the ability to add a bracket to any part of the shelf for additional…
Drawer Slide Inserts for Double Strung Continuous Rigging Lifts This part was designed to provide a double pulley (v-bearing) insert for FTC robot telescoping lifts using aluminum drawer slides. A two-pulley design provides the capability…
A flat snap fit shelf for skadis rack. Used with SkadisContinuousShelf-Bracket.STL 0.3 layer height pla+ 15% infill
I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.
Seedlings Pot - Continuous Self Watering System (PET Water Bottle)
Be Extremely Careful when removing from build plate. I highly suggest letting it cool before removing from the plate. I printed in .15 mm layer height but you can probably do .2 as well. ENJOY!
Make sure to orient the shelf correctly on the print bed to avoid overhangs in the mounting points.
A drill bit is easy to turn once by hand, then you have to regrip and do it again. This design allows for continuous turning. Use one hand to hold and push the drill in, while your other hand cranks the drill bit around and around. Easy!…
The continuous shelf designed by Ivan has been as handy as the Skadis pegboard. One thing I wanted to be able to do was have a safe place for my Lego VW T2. The continuous shelf fits perfectly, but I was worried that the VW would roll…
You like the IKEA Skådis continuous shelf but you want that top shelf stuff. This bracket reaches a little higher and can grab the top edge of the pegboard. I had to move both hooks - in case you're worried about shelf height it will…
This is a remix of Ivan Urbánek's fantastic Continuous Shelves bracket, the peg is slightly reduced in thickness
This is a 3 slot MLok Handguard with a continuous picatinny rail. You can now install things like this comically large M16 carry handle or move your scopes anywhere. Longest inner barrel this version can cover is 173mm. No supports…
These cubes continuously rotate around each other, while staying parallel to the x,y axes. No hardware is required. This project is the result of my study of non circular gears. PDF download:…
VIDEO: https://youtu.be/kHT3rltCInU VIDEO OF WALL MOUNT: https://youtu.be/K\_UAO0O55NQ VIDEO OF NEW RETRACTABLE ID BADGE HOLDER SPRING CLUTCH: https://youtu.be/7oF00uh40uk I designed this to be the, "Be-all, end-all" universal spool…
This is a fan cover for the inside of the Qube 500 enclosure. It has been optimised for 140mm/120mm fans. The different parts of the cover are plugged together and the whole cover is fixed to the enclosure with 6x M4 screws. The same hole…
Rose continuous drawing lines wallart
a replacement coupling for a Bosch continuous slicer (part number 00032884) 3d-printable version of the original part compatibility according to Bosch website: MUM4406 MUM4427, MUM4655 MUM4655EU MUM4656COE MUM4657 MUM4756EU MUM4855…
This is a continuous clearance test for your printer. With this test parts you can choose a clearance suitable for your task. Print instructions General information: The hole and the pin are cones with 0,01 mm diameter change per mm…
Puzzle_v4_1(Continuous path through) I made a fun modle of developmental game. It's an fourth version extension(Continuous path through). puzzle_v4 It is easier than the Puzzle_v4 version. Game Instructions: 1.The modle requires three…
The Anti-Oloid is a distinctive three-dimensional geometric form derived as a conceptual counterpart to the classical oloid. While the oloid is generated from two congruent circles arranged in perpendicular planes with each circle's…
Light bulb continuous drawing lines art decor wall art
Stepper-driven pointer with continuous rotation: the steppers are fixed so no cable tangles. Print Settings Printer: Mini Kossel Rafts: No Supports: No Resolution: 0.2/0.3 Infill: any Filament: Random PLA PLA White Notes: Should print…
This is a printable Hunter Douglas Universal Continuous Cord Loop Tensioner for Cord-Loop Operated Blinds & Shades. This a quick design I threw together to fix some blinds around the house.
Additional information on this system and characterization can be found here : https://doi.org/10.1039/D4RE00081A Modifiable files can be found here: https://github.com/Noel-Research-Group/3D-printed_UFO_Reactors The reactor is designed…
This pump is designed to work with a servo or simple DC hobby motor. It requires additional components including: 3mm ID/4mm OD Silicon Tubing (like this https://www.amazon.com/dp/B06W2JW633 ) 3 Ball Bearings (4mm X 13mm X5mm…
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
This tests performing long, fast continuous extrusions. Best performed with Prusament PLA 0.25mm SPEED on Prusa Core One 0.4mm stock nozzle Correctly printed this object should be 230 x 210mm 1mm wide walls that are 2mm tall
Continuously Stirred Tank Reactor (CSTR), assembled with 5 bodies, important to print the "Bar" part 3 times. for the stirrer I would recomend printing with some rafts
Seahorse continuous drawing lines wallart
This model is a single-layer spiral-square path designed for advanced bed alignment and extrusion tuning across the entire build surface. The nozzle follows a continuous spiral of nested squares until reaching the center, minimizing…
Build an autonomous GPS Tracker for vehicles and RC planes, sending location updates via SMS! Full project on: https://www.pcbway.com/project/shareproject/Continuous_GPS_Tracker_be380692.html
The shelf has Lego compatible surface
Features Forward and reverse control Adjustable motion duration Wireless control over WiFi Simple and lightweight setup Compatible with continuous rotation servos Hardware Wemos D1 Mini / ESP8266 Continuous rotation servo motor Jumper…
The MUM9 slicer needs a lot of space if stored as it is, because it has no support below its connection point to the machine. This “model” is very simple but effective – it just supports the slicer at the right position, and allows you to…
Side walls use an alternating, overlapping pattern so there no isolated columns/islands of extrusion, reducing stringing, and strengthening the sidewall mesh. Bottom flat surface has been replaced with high-density honeycomb infill in the…
Transform an ESP32-CAM into a standalone security camera with continuous recording and automatic storage management. This project runs on a rechargeable 18650 battery and requires no WiFi or external power. What's included: Custom PCB…
What is Continuous Curvature If you know, you know. I didn't know until 12 years into designing. So here's some help for the rest of the uninitiated following along. Ever wonder why the curves on Apple's devices just feel different than…
This was based off the fantastic Thorin Oakenshield, he-deigned chain, and I wanted to make a continuous chain that I can test with "how much weight can I hold." This chain is almost three chains long; disclaimer: it will need to be…
I added a kind of ram to the fan shroud, to prevent smaller things getting stuck between the fan an heatbed when using continuous print. A longer M3 bolt is needed for the top mounting point of the fan.
Ensure the surface beneath text is continuous by holding the text in mid air with a zero infill and zero perimeter version of the target object and superposing that over the original object.
Hardware: The only hardware needed for this beam dump is a steel spike. I made this myself from mild steel. (20mm length, 6mm diameter, 45 degree (ish) point angle). Before turning the laser to full power, make sure that the beam hits the…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
Continuously Stirred Tank Reactor (CSTR), assembled with 5 bodies, important to print the "Bar" part 3 times. for the stirrer I would recomend printing with some rafts
Ensure the surface beneath text is continuous by holding the text in mid air with a zero infill and zero perimeter version of the target object and superposing that over the original object.
The majority of us can't afford original works of sculpture, but 3D printing allows today's sculptors to work in published editions, like traditional 2D printmakers or novelists. This historically unprecedented reality makes it affordable…
