Continuous extrusion Prusa USS Silica gel box and funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized silica gel box for less stringing and stronger sidewalls. A filling funnel is also included.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 25
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Side walls use an alternating, overlapping pattern so there no isolated columns/islands of extrusion, reducing stringing, and strengthening the sidewall mesh.
Bottom flat surface has been replaced with high-density honeycomb infill in the slicer.
3MF files are PrusaSlicer project files, so if you plan on using a different slicer the main changes are adding a height-range modifier from 0-1.2 mm with infill at 40% honeycomb, and zero top or bottom layers.
These settings are the same for the bottom and the lid:

For the funnel, use vase mode with zero bottom layers. I also suggest changing external perimeter extrusion width to 0.8mm.
