Continuous extrusion Prusa USS Silica gel box and funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimized silica gel box for less stringing and stronger sidewalls. A filling funnel is also included.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Side walls use an alternating, overlapping pattern so there no isolated columns/islands of extrusion, reducing stringing, and strengthening the sidewall mesh.
Bottom flat surface has been replaced with high-density honeycomb infill in the slicer.
3MF files are PrusaSlicer project files, so if you plan on using a different slicer the main changes are adding a height-range modifier from 0-1.2 mm with infill at 40% honeycomb, and zero top or bottom layers.
These settings are the same for the bottom and the lid:

For the funnel, use vase mode with zero bottom layers. I also suggest changing external perimeter extrusion width to 0.8mm.
