Dual & single JetKVM insert for the UniFi AI Key rack mount (UACC-AI-Key-RM)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JetKVM insert for the UniFi AI Key rack mount / JetKVM in a UniFi AI Key bay — 1x and 2x, screens proud
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Fills one AI Key bay in a Ubiquiti UACC-AI-Key-RM with one or two JetKVM units, screens standing proud of the panel so the slanted displays stay readable from the front of the rack.
### Print this first
**Print fit-comb-fine.stl before the body.** It's five rings of the bay opening minus a range of clearances, labelled in hundredths of a millimetre. Push each into your bay; the tightest that slides in without force is your number. Forty minutes of printing beats a five-hour part that binds.
The bodies come in two clearances. On the mount and printer this was developed against, ring 05 was snug, so **0.10** is the default. Use **0.05** if your comb says so.
### What you need
* a UACC-AI-Key-RM with a free bay
* one or two JetKVMs
* 4x M3 x 12 countersunk thread-forming screws (rear plate)
* 2x M2 x 16 SHCS (down through the mount's top rail)
### Assembly
1. JetKVMs in from the front until the fillet seats — they should need a push. Three 7 mm ridge bands per pocket wall stand 0.10 mm proud so nothing rattles.
2. Rear plate on, 4x M3 x 12. The window leaves 39.7 x 20.0 mm over the ports.
3. Push the assembly into the bay from the front until the flange meets the panel.
4. 2x M2 x 16 down through the mount's top rail.
### Credits
Modelled with Claude (Anthropic) in a Claude Code session: the parametric source, the boolean fit checks and the analysis of the vendor model that found the wedge are its work.
Thanks to JetKVM for publishing a STEP model accurate enough to design against — it isn't redistributed here.