1 / 6
PS Cover - LH Switching Power Supply - L1HUA — image 1
1 / 6

PS Cover - LH Switching Power Supply - L1HUA

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

After the modified ATX PSU I had been using on my Printrbot Simple Metal died, I decided to replace it with an after…

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
271
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

After the modified ATX PSU I had been using on my Printrbot Simple Metal died, I decided to replace it with an after market 12V, 30A, Switching PSU. (This is the "Most Popular" PSU on Amazon ... or at least that 's what they claim.)

Like most Maker/Users I needed to make or download a cover for the power connections.

Unfortunately I discovered that no two PSU's are the same. I was temporarily using the PSU from an Anet A8 Kit, and assumed that it would be a match to replacement I had ordered.

It wasn't.

So this is the cover I came up with. I used the switch from the ATX PSU that died (it is rated at 10A), and I left plenty of ventilation slots throughout. You can also access the power connections from the top (with a screwdriver) without removing the cover.

Print Settings

Printer Brand:

Printrbot

Printer:

Printrbot Simple Metal

Rafts:

No

Supports:

Yes

Resolution:

.25mm

Infill:

50%

Notes:

I printed this with "Internal Support" for the switch and screwdriver openings.

Category: 3D Printing

Tags