1 / 6
PS Cover - LH Switching Power Supply - L1HUA — zdjęcie 1
1 / 6

PS Cover - LH Switching Power Supply - L1HUA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After the modified ATX PSU I had been using on my Printrbot Simple Metal died, I decided to replace it with an after…

Ocena
0 / 5
Polubienia
5
Pobrania
33
Wydruki
0
Wyświetlenia
271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

After the modified ATX PSU I had been using on my Printrbot Simple Metal died, I decided to replace it with an after market 12V, 30A, Switching PSU. (This is the "Most Popular" PSU on Amazon ... or at least that 's what they claim.)

Like most Maker/Users I needed to make or download a cover for the power connections.

Unfortunately I discovered that no two PSU's are the same. I was temporarily using the PSU from an Anet A8 Kit, and assumed that it would be a match to replacement I had ordered.

It wasn't.

So this is the cover I came up with. I used the switch from the ATX PSU that died (it is rated at 10A), and I left plenty of ventilation slots throughout. You can also access the power connections from the top (with a screwdriver) without removing the cover.

Print Settings

Printer Brand:

Printrbot

Printer:

Printrbot Simple Metal

Rafts:

No

Supports:

Yes

Resolution:

.25mm

Infill:

50%

Notes:

I printed this with "Internal Support" for the switch and screwdriver openings.

Category: 3D Printing

Tagi