1 / 11
Bike CO2 holder 16g & 25g (27,2mm/30,9mm/31,6mm/37mm) — image 1
1 / 11

Bike CO2 holder 16g & 25g (27,2mm/30,9mm/31,6mm/37mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bike CO2 mount to be used on a 36,76mm diameter tube, but has been tested on a 31mm seatpost (look the images) with no…

Rating
5 / 5
Likes
73
Downloads
233
Makes
1
Views
2,579
Reviews
2

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike

Bike CO2 mount to be used on a 36,76mm diameter tube, but has been tested on a 31mm seatpost (look the images) with no problem.

UPDATE (22/01/2022): Added 25g CO2 holder for 31,6mm, 30,9mm and 27,2mm seat post. The measured 25g CO2 cartridges have a diameter of 25,5mm. Updated STL files of 16g CO2 cartridges for 31,6mm and 27,2mm seat posts to V2.

UPDATE (28/05/2020): Updated STL files, added .f3d file and also 27,2mm diameter CO2 holder.

NOTE 1: It has been designed for TOPEAK 16g cartridges with a diameter of 22,2mm, if yours has another diameter post a comment. If the diameter is another one it won't fit correctly.

NOTE 2: It can handle up to a 24mm wide strap. I tested with a 20mm wide and 25cm long strap (look at the photos).

If you need another bike tube diameter just post a comment, i have no problem to upload as many as you want.

The design has been tested and is very though, won't break easilly.

The thread is 3/8-24 UNF

Print Settings

  • Rafts are not totally necessary, but I had problems with the supports.
  • Try to use low resolution in order to have an accurate thread for the cartridges, i have tested with 0.16mm and it's fine.
  • 5 wall lines are recommended for better stiffness.

In CURA the "Layer view" should look like this:

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

Yes

Supports:

Yes

Resolution:

0.16

Infill:

50%

Filament: eSUN PLA+ White How I Designed This ===================

I used a caliper and did some prototypes in Autodesk Fusion 360.

Category: Sport & Outdoors

Tags