Simple tape dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact Tape Dispenser – Simple, Fast & Practical
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 1
- Views
- 102
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Compact Tape Dispenser – Simple, Fast & Practical
A simple and compact tape dispenser designed for everyday use and, just as importantly, for an easy and quick 3D print.
The wide side plates keep the tape roll securely in place, while the curved base makes the dispenser comfortable to hold and easy to use. The integrated cutting teeth allow you to tear off the tape without needing scissors.
The design is intentionally kept simple: no complicated parts, no supports and no assembly headaches. Print it, insert your tape roll, and it is ready to use.
Recommended print settings
Layer height: 0.20 mm
Supports: None
Material: PLA recommended
Other materials: PETG, ABS and similar materials should also work well
Orientation: Print as supplied/oriented in the model
Small finishing tip
Depending on your printer, material and nozzle, the cutting teeth may come out slightly rounded. If necessary, simply sharpen the tips a little with a small file after printing. A few strokes are normally enough to improve the cutting action considerably.
A useful little print for the desk, workshop, kitchen or hobby room — uncomplicated, economical and ready in a short printing time.
P.S. After publishing, I noticed that there are other simple tape dispensers available to print. OK, mine has a screw-on lid.