Large Victron MPPT Fan Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan shroud for the larger Victron MPPTs such as the 250/100 and 150/100 to use a 120mm x 38mm fan.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple fan shroud I threw together for the larger MPPTs That was designed for a 120mm x 38mm fan. It should work with thinner fans as i have left a notch for the wiring should you use a thinner fan. I have made a few modifications from my original version that I have printed but I have included the f3d and skp files should you decide to make changes yourself.
I know for certain this fits the 250/100 and 150/100 but a quick search shows that the following share the same footprint
- 150/70
- 150/85
- 250/70
- 250/85
Also take note that My MPPTs are mounted to 2x4s mounted flat against the wall, If your mppt is mounted directly to the wall, this should still work but I have also included the files with the front half of the intake side blocked.