Large Victron MPPT Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud for the larger Victron MPPTs such as the 250/100 and 150/100 to use a 120mm x 38mm fan.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple fan shroud I threw together for the larger MPPTs That was designed for a 120mm x 38mm fan. It should work with thinner fans as i have left a notch for the wiring should you use a thinner fan. I have made a few modifications from my original version that I have printed but I have included the f3d and skp files should you decide to make changes yourself.
I know for certain this fits the 250/100 and 150/100 but a quick search shows that the following share the same footprint
- 150/70
- 150/85
- 250/70
- 250/85
Also take note that My MPPTs are mounted to 2x4s mounted flat against the wall, If your mppt is mounted directly to the wall, this should still work but I have also included the files with the front half of the intake side blocked.