1 / 2
[TPU] Gasket for Earcup Extension on Bose QuietComfort — image 1
1 / 2

[TPU] Gasket for Earcup Extension on Bose QuietComfort

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Additional gasket to improve snugness of fit to earcup extensions.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

After printing the original extension, I found the fit to be too loose.  It could be snapped in, but would rattle around and did not provide an effective audio seal.

This gasket must be printed in TPU or some other flexible material.   I have printed this with Shore 95A and works perfectly fine for my needs.

The gaskets are not perfectly symmetrical!  The thicker face meant for the print bed should be against the spacer, and the thinner side/wedge towards the headphones.

Printed on a 0.4mm nozzle but I'm sure 0.6 would also work perfectly fine for this.

This is only the gasket! you still need the original model here:

Tags