Halloween Pumpkin 3D Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spooky and atmospheric Halloween pumpkin lamp, perfect for seasonal decorations, desk lights, or mood lighting!💡…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 92
- Makes
- 1
- Views
- 291
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A spooky and atmospheric Halloween pumpkin lamp, perfect for seasonal decorations, desk lights, or mood lighting!
💡 Model Overview & Hardware Requirements
This model features a classic Jack-o'-lantern design crafted specifically to house a slim circular LED module.
LED Compatibility: Designed specifically for a circular LED puck with a 60 mm diameter and 8 mm height.
Directly compatible with:
Bambu Lab LED Lamp Kit 001
Parts: Split into 2 main parts (Top/Body section and Bottom/Base section) for effortless assembly and wiring management.
🖨 Recommended Print Settings
Setting | Recommended Value | Notes |
|---|---|---|
Supports | Enabled | Required for overhangs around the eye and mouth cutouts |
Infill | 20% – 25% | Grid or Gyroid recommended |
Wall Loops / Perimeters | 3 Minimum | Helps prevent light leakage through internal infill patterns |
Layer Height | 0.16 mm – 0.20 mm | standard print height for clean details |
Material Choice | PLA / PETG | Orange or Warm Yellow (for pumpkin shell), Dark Brown/Green (for stem) |
🛠 Assembly Instructions
Print the upper pumpkin shell and lower base plate using the recommended settings.
Remove all support structures carefully from the inner cavity and facial cutouts.
Insert the 60 mm x 8 mm LED puck into the dedicated slot in the bottom base piece.
Route the power cable through the rear cable cutout.
Join the top and bottom pieces together.
Happy Printing & Happy Halloween! 👻
☕ Personal & Commercial Use Info:
This digital model is free for personal use only.
If you wish to sell physical 3D prints of this model, an active commercial subscription is required.
🔗 Get your license & commercial rights here: https://www.patreon.com/cw/Vinors3DLab