Multiboard screwdriver tray for Wera VDE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray to hold six screwdrivers (Were VDE) with four multiboard snaps screwed on.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My screwdrivers came without a tray.
I've made multiple trays for them, and this is the latest iteration to click them into multiboard.
Features:
Mount easily to multiboard
Don't fall off at the slightest touch
Three screwdrivers wide, two deep
Have a handle
Be able to lay 'on its back' without tipping over
Print with limited supports
The multiboard snaps are attached with metric cilinder-cap hex bolts of size M4x12mm. For a next iteration I will probably use countersunk screws instead.
Two moderate weight bearing snaps at the top, with mid-print M4 nut inside.
Two normal snaps at the bottom, mid-print M4 nut. These ones are printed at scale 98% to make snapping and removal easier.
Print tilted 45 degrees, with supports only for the handle.