Multiboard screwdriver tray for Wera VDE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray to hold six screwdrivers (Were VDE) with four multiboard snaps screwed on.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My screwdrivers came without a tray.
I've made multiple trays for them, and this is the latest iteration to click them into multiboard.
Features:
Mount easily to multiboard
Don't fall off at the slightest touch
Three screwdrivers wide, two deep
Have a handle
Be able to lay 'on its back' without tipping over
Print with limited supports
The multiboard snaps are attached with metric cilinder-cap hex bolts of size M4x12mm. For a next iteration I will probably use countersunk screws instead.
Two moderate weight bearing snaps at the top, with mid-print M4 nut inside.
Two normal snaps at the bottom, mid-print M4 nut. These ones are printed at scale 98% to make snapping and removal easier.
Print tilted 45 degrees, with supports only for the handle.