Top-Loading SD Card Shell for SD Cards with 15 mm Chip (Stock Prusa Goodram Card)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model to save your Prusa SD Card content. No models I found was in the exact size of Prusa card chip
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Top-Loading SD Card Shell for SD Cards with 15 mm Chip (Stock Prusa Goodram Card)
This is a model to save your Prusa SD Card. No models I found was in the exact size of Prusa card chip so I made this.
Converted the original SD card replacement shell into a top-loading design so the PCB can be installed through an opening in the upper surface instead of being trapped during assembly. The internal PCB channel/groove was revised for the 15.10 mm board, support/bracing was added around the loading window, and a separate thin cover was created to close the opening after installation. The cover is intended to be secured with tape, eg. Dymo 12 mm D type stickers.
Print settings:
0.10 layer height
Supports on build plate only.
Enjoy!