Top-Loading SD Card Shell for SD Cards with 15 mm Chip (Stock Prusa Goodram Card)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model to save your Prusa SD Card content. No models I found was in the exact size of Prusa card chip
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Top-Loading SD Card Shell for SD Cards with 15 mm Chip (Stock Prusa Goodram Card)
This is a model to save your Prusa SD Card. No models I found was in the exact size of Prusa card chip so I made this.
Converted the original SD card replacement shell into a top-loading design so the PCB can be installed through an opening in the upper surface instead of being trapped during assembly. The internal PCB channel/groove was revised for the 15.10 mm board, support/bracing was added around the loading window, and a separate thin cover was created to close the opening after installation. The cover is intended to be secured with tape, eg. Dymo 12 mm D type stickers.
Print settings:
0.10 layer height
Supports on build plate only.
Enjoy!