waveshare ESP32-S3 1.45 Round Display dev board with glass basic case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.23 – €0.28 net (excluding VAT)
For file: waveshare-esp32s3-case.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 16.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a basic case with openings for USB-C, speaker, microphone.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
I used PLA with 0.20mm structural on prusa.
When inserting device, put USB-C in first while ensuring it is aligned with the opening's center.
The device is very fragile, so don't pull it out by the screen or the screen can come off!