Hyperbolic Slot Illusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple illuson : a straight rod goes through a curved hole. This model is special, because rod and curved hole rotate.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
My Hyperbolic Slot Illusion is a 3D printed illusion model with a smooth spinning mechanism and a satisfying visual effect. It stands out from many similar models online because both the hole and the rod spin, and the gears rotate well too, giving it a more dynamic feel overall.
Features:
Hyperbolic illusion-style design
Dual-spin mechanism with both the hole and rod rotating
Gears rotate smoothly
Clean visual effect
Good as a desk toy or display piece
Print Info:
Supports: minimal
Printer: Anycubic Kobra 3
Filament use: under 200g
Print time: around 5 hours, depending on the printer
I recommend printing it a little slower for the best tolerances. It worked well for me, and you can add a small amount of glue if you want a bit more rigidity(For example the rod, the curved hole part, or the gears with the sticks).
If you have any recommendations, criticism or questions, please write them down in the comment section.
Please download,print and like! :)
Assembly:
1)SEPERATION:
The parts are seperated into 2 categories:
Rotating curved Hole
Rotating straight rod
2) Gear assembly
-Take The box
-Locate the lowest hole(the hole without the cylinder sticking out)
-Put the stick clip on before connecting the stick with the gear(I personally didnt do it, worked without, the stick slips sometimes, recommended to leave it on)
-Take the gear for the curved hole stand and the long stick for that gear(the gear with less teeth and the stick without any bending)
-Put the gear in the box and connect stick and gear from the outside(just like the picture shows it)
-Do the same thing on the other side.
-Insert the bended stick throught the cylinder and connect it with the gear with many teeth(the one for the rod ring)
3) Rod ring+ Box
-The rod ring has an indent .
-The Indent has to slide onto the thing sticking out from the box.It might need some pressure when pressing it in,but when it gets in, it should spin freely
4)Curved hole stand
-Place the hole which is under the stand for the curved hole on the pole sticking out of the box
-Insert the curved hole part into the given 2 holes
5)Rod + rod ring.
-Locate the hole in the rod ring
-Insert the rod in that hole
-From the birds eye perspective the rod should stay inside the circle , not outside the circle, it should create a 45 degree angle when it stands upright.
And thats it!, now you have a hyperbolic slot illusion for yourself!
If you have any doubts questions or criticisms , then please let me know down in the comment section