Counting matching models…
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
I wanted to have the filament run out sensor hang over the 2020 extrusion, as the Two Trees Bluer Plus uses an extrusion with a flat front but standard 2020 track on top. This uses M3x10 to self-tap into the plastic, and used the M5…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
A mount to fit on the battery rails of the Holybro X500V2. I made it for my Micoair MTF-01 Optical Flow, but it could work with anything. Printed in PLA. There's little holes for zip ties to lock it on the tubes but my print came out…
this is a nice sculpture of a mom and a dad names that varies on the angle you are looking from :)
Holds a standard DLSR camera, for example Canon Eos 50D secure with a ¼"-20 UNC screw. unfortunately, thorlabs posts do not come with 8-32 to ¼"-20 adapters, those are available (see:…
Printed at .2 layer height with organic supports for the little tabs. Upgraded model should fix the gaps shown in the photos. I just didn't bother to print another one because this one works, it's in a place nobody sees, save materials…
Optico Professional Optical Glasses Cleaning Wipes (50mm x 69mm package) from Costco - Dispenser. Two versions, 90mm and 120mm tall. Mount with command strips to wall. Alternate 120 version with 2 holes 40mm apart. Alternate 90 version…
This pen holder is based on the fascinating work of Kokichi Sugihara, known for his mind-bending optical illusions, and inspired by the original STL model from Dandy Cat Lab. I remixed their design to create this functional version:…
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
Splice tray with adjustable loop length. For optical fiber joints.
Design I have this little Guangyan/UltraLan pocket tester in my tool bag. It does not come with any kind of protective casing, so I made a simple one just to keep it a bit safer. Links to the tester can be found at the bottom of this…
This model was made for a Plasmonics Internship, where I had to secure the optical fiber. It has a special end to it from another equipment, which I do not record (probably a spectrometer). This model was, in part, inspired by the "…
This is an enclosure for optical sensor. It's made to mount on the creality runout sensor bracket. the creality sensor is just a switch and I had issues with the filament wearing down the switch roller. so made a contactless version. Did…
What is Galileo2 : it's a open source extruder https://github.com/JaredC01/Galileo2 What is a PRUSA MK3S+ IR filament sensor? What is MK3S+ IR filament sensor? you can get one from your old retired MK3S+ printer, or buy one for about $6,…
2x3x1.5 Gridfinity tray for optical center punch guide, sites and punch's. Paused print last 4 layers to change colors to add a bit of contrast and flare to the print.
Holder for hex keys and other screwdrivers mountable to the edge of an optical table, now with labels
Which line do you think is longer? (It's the bottom one. They aren't perfectly equal lol.) Maybe you've seen this before, but in case you haven't, this is an arrow optical illusion. What you're supposed to do is ask the question (To…
Hi i made this in blender there are no moving parts hope you like it.
The bottom of a Nikon vertical (epi) illuminator fits into an American Optical Spencer series 10 microscope, but there isn't enough room for the AO head assembly to fit into the top of the illuminator. Including openscad file for…
Not everyone sees this illusion at first. My neighbor introduced me to this optical illusion as he makes them out of wood. Smaller size than the referenced original model by Junior Avenger (…
A kinematic optical mount for 1'' optical elements. You will most likely want to mount it differently, like on a post or in another rigid way as you will move the entire mount when adjusting the screws screwing up the alignment. I…
What it says on the tin. A simple mount I threw together quickly because I needed it. Mounts a 120mm PC fan to a standard 1 inch spaced optical table using two 6-32 screws and nuts. This was printed in white PCTG, but the design will work…
I printed this in PLA+.. Tip: Check the dimensions in your slicers measuring tool before printing to make sure you will get what you expect.
I printed the bottom ring at 100% infill, and the whole model with 3 perimeters. I find that even with that and the other bolstering mods, I can still rotate the microscope with enough force, but it's much better than it was. I used…
The fan blades are based on the Fibonacci curve, which is used extensively throughout nature to provide improved efficiency. Artist also used the Fibonacci curve to locate the point of interest in a painting. This design is an improvement…
Got an leftover parts from your old Ender 3 Pro? Switched to Direct Drive and have a spare extruder lying around? Don't throw them away. This project turns your "leftover" parts into a high-precision, optical filament movement sensor that…
We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. This is the first in a series of 3D printing optimized…
Is your desk hiding a fierce beast? It looks like an innocent, modern white cube... until you find its secret. With just a simple shift of light, a complex, ancient warrior is unleashed. The Illusion This isn't just a white square. It's a…
Enhance your cyberware setup or workspace with this lightbox featuring the Kiroshi Opticals from Cyberpunk 2077. The internal geometry features a physical divider that separates the top section (KIROSHI + logo lines) from the bottom…
Needed a place to put my USB Optical Drive for when I rip my media and found the ESRack Template, added in the dimensions for the Verbaitim 43888 optical drive I have and now I've got a cleanly rack mounted optical drive. Just note that…
We all love our friends at ThorLabs, but sometimes you just need a part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. This is part of a 3D printing optimized optomechanics system. The 60mm…
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Just wanted to make a fun optical illusion like cover for Elite liquid cooler. Feel free to add whatever colors or…
If you want the behind the scenes of any of my existing/upcoming models please check out my youtube Channel/TikTok Account. https://www.youtube.com/@TheRealLTCG https://www.tiktok.com/@the_real_ltcg
A simple but cool optical illusion as a wall decoration, printing only takes a few minutes
Cool optical illusion for the wall, simple and without the need for supports, only a few minutes of printing
I put some threads in the base for a quarter twenty screw
Optical illusion coaster than changes pattern at different viewing angles. Watching it print is memorizing!
Možná by bylo lepší vytisknout spirálu z materiálu, který se dá vyhladit, takhle jak se přejíždí po vrstvách, tak to dělá dost rámus :) Spirála se musí zalepit do kolecko2.stl Trochu problematické jsou občas závity v stojánku, ale s…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design →…
A simple geometry illusion, rearrange the pieces as shown in the pictures to make the gap in the middle appear or disappear. It may be a bit of a tight fit in the configuration with the open but. Print x2 copies of the “L-Piece” Print…
I designed this Optical End Stop Switch mount & carriage flag to fit my 2020 delta printer. I also made a cover to fit over the switch to help prevent stray light affecting the sensor. The printer started as a FolgerTech Kossel, which I…
Adapter for optical endstop from Trianglelabs: https://aliexpress.com/i/32852113543.html?gatewayAdapt=glo2vnm Endstop adapter only compatible with metal kit! It uses left side xy joint original endstop trigger end.
Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…
I publish my designs for free, please leave me a like if you like my design or even download it - Thank you and take care! In 2023 I released a remix of an optical illusion wind wheel (original by Dynamite ). I wanted to make the largest…
This is an optical fiber splitter spool support for 50:50 splitters. It is based on the TN1550R5A2 splitter from Thorlabs and similar models. The pocket on the upper part is made to accommodate the sleeve. The elongated holes above and…
Lens cover for the x10 lens and the LED lens to keep them dust free when you are not using the Starrett HE400 shadowgraph / optical comparator Print Settings: 0.1/0.2mm Layer Height 2 Wall Thickness 10% Infill
Purchased a BMAX micro PC and external optical drive to save some space on the desk. In keeping with the small foot print, and wanting to keep the functionality of the expansion ports on the optical drive, I put this guy together. It is a…
An internal optical drive bay for the Fractal Node 804 designed to be printed on a 250 x 250 build plate. This mod replaces the mesh in the top panel so that you may mount the 5.25" optical drive bay. Designed mostly in tinkercad,…
Modelled this a while ago for my optical switch keyboard. I recommend printing this in resin with an SLA printer. I think it's possible with an FDM printer but I'm not sure how well it would turn out.
I wanted to have the filament run out sensor hang over the 2020 extrusion, as the Two Trees Bluer Plus uses an extrusion with a flat front but standard 2020 track on top. This uses M3x10 to self-tap into the plastic, and used the M5…
This is remix of the original bracket to accommodate a wider IDE drive optical board. Theoretically, it should still work with the slimmer IDE boards too. The original designer has stated that the original design will work with the IMac…
Our ONT was installed over an unused back box using the two screws. The fitting was not secure or attractive. This bracket fits using the two existing screws which are 60mm apart. The size of the base plate is 90mm square covering a…
Just a small model to understand the validity of pythagoras' theorem. If you switch a² and b² with c² and rearrange it with the traingles, you will see that it claims the same area, which means that a²+b²=c² is valid. To print this model…
Print Settings Rafts: No Supports: No Resolution: 0.20 mm Infill: 25 %
This design allow to create and keep a loop for the fiber and avoid damaging or breaking it just put double-sided to fix it in the network cabinet. Supports are required for hooks.
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
This tool allow you to measure the surface energy or wetting/adhesion of solids. Bill of Materials 40-1000x USB Microscope (Required) Rechargeable LED Light Panel (Required) .5-10μl Micro Pipette (Required) 10μl Micro Pipette Tips…
This is an mini-optical workbench for experimental & demonstration purposes. Unlike the professional optical workbenches which use M6 threaded holes spaced 25mm apart for mounting larger components on a thick aluminum plate, this design…
This Mini Optical Alignment Mechanism is a practical adjustment instrument designed to enable the precise positioning of lasers & optical components in all three dimensional spaces; i.e. X, Y, and Z. It includes a generic mounting…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
Recently I acquired this : Yellowhammer Precision Tools Optical Center Punch Set includes Bulls Eye Lens, Cross Hair Lens, 150 Degree Center Punch, 60 Degree Center Punch and Plastic Storage Case The optical center punch seems to be nice…
Remix of Tom_DD's "5.25" DVD/Blu-Ray Drive Enclosure/Sleeve" to accommodate a Vantec NexStar USB 3.0 to SATA 6Gbps Optical/Storage Adapter. Full and Bottom sections modified, Top part is the same as original but included for completeness.…
I needed something pretty specific, so I made it! it mounts 2 raspberry pi model 3s, as well as a uGreen SD card/cf reader, a 40mm fan, and a single panel-mount 30mm-spaced USB 3.0 header. This is the SD card reader used here I would…
Hello dear community! Here is my remix of the xy clamp for optical sensors. Print it and have fun. :) Print instructions Category: 3D Printer Parts
Hello dear community! I've found this excellent design and was inspired by it. I decited to do a little mashup, because the original idea wasn't meant for the LMK12LUU deisgn. BOM 7x M3 nuts 3x M3x40 1x M3x10 1x M3x15 and a optical…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
3d scan of microsoft wheel mouse optical 1.1a, no scroll wheel included, use it for shapetesting or smth
The #Lion ...Undisputed king of the savannah. Here it is in 3D, in a beautiful optical illusion possible to achieve thanks to the additive manufacturing. Thanks to @3dpimp (Thingiverse and Instagram) for your help Video :…
I was fiddling around with making twisting shapes that print in one go. This "twister" spun so well I wondered if it would be possible to create the Face/Vase optical illusion. I happened to have silhouettes of my daughters already from a…
The Squarcle is a 3D optical illusion based on the work of Kokichi Sugihara (as seen at https://www.youtube.com/watch?v=oWfFco7K9v8 ) I was so intrigued after watching that that I was compelled to try to replicate it myself! It has taken…
Mount for a Matek Systems 3901-L0X Optical Flow and Lidar Rangefinder sensor to fit flush on the bottom of the Rekon 7 drone frame. The mount requires 2x M3x4 and 4x M2x8 fixings to assemble. Route the wires up through one of the holes in…
Mount for infrared optical water sensor widely available on ebay and elsewhere ("Infrared Water Liquid Level Sensor Control Switch") . Sold by DFrobot as Sensor-FS-IR02, https://wiki.dfrobot.com/Liquid_Level_Sensor-FS-IR02_SKU__SEN0205 .…
This mounting bracket is used to position and protect against ejection of the optical drive Lenovo P330 station. Is not necessary but makes installation easier and safer. Attention: Optical drive used in this computer is 9.5 mm high.
Wanted to use the LH Stinger Pico MMU, but use it with my existing setup. there is no mechanical runout sensor on the machine, so this is an adaptation to use the Optical sensor designed by SilencedFrost. If using an existing optical…
Comparision between versions On the pictures you can see designed versions of sensor. All are printed in draft mode. From left V1.0, V2.0, V2.1 Bom 3x 619/5 bearings spring (I used one from a ballpen) end stop optical sensor MK8 drive…
Wemos D1 R32 ESP32 or Arduino Uni like boards mount for an optical table with M6 or 1/-20 screws.
This set of breadboards is perfect for custom projects that require mounting and adjusting the position of various elements! The pitch of the breadboard is 5mm and it is ready for M3 screws without additional nuts (holes are 2.95mm and…
IMPORTANT NOTE feb 21st, 2021 This project is finished enough to be used, I will not abandon it, but I will also no longer give it care and attention, unless specifically asked for! Reason is, I have ordered a couple of 2209 drivers and…
Simple organizer for ½ inches optical posts of various sizes. The complete structure can host 80 posts (10 for each box) with height between 2 cm and 30 cm, and also includes a front box for screws and setscrews. I also include the models…
This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…
Before and After 6 Beers Optical Illusion nozzle 0,25 layer 0,1mm
If you lower the CR6 printer bed (e.g. by converting to a rail-mounted bed), it can result in the x-axis fouling the top of the optical sensor before the nozzle reaches the bed. While Klipper ignores that sensor, the Marlin-based CR6…
Marlin-based firmware for the Creality CR6 printer uses an optical sensor to trigger taring of the nozzle probe. To trigger the probe taring, a small target mounted to the x-axis is presented to block the sensor. Some printer…
I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…
I was looking around for a runout sensor since I upgraded my Ender 3 Pro with a Micro Swiss Direct Drive and found the design by Sulfu, which is quite smart. It utilizes an optical sensor and is compatible with transparent filament by…
A case holder for the optical fibre and the optical head of a Metrohm electrochemical raman equipment. The lid screws on the bottom. There is space for added foam padding for the optical head. There are 4 openings in the case for…
You can print out with dark filament again white Wall . This is optical ilusion . You can stick on the wall.
A simple enclosure to encase an internal 5.25" Optical Drive, to be used externally with an adapter. Specifically, this was for the Pioneer BDR-209DBK with this adapter https://www.amazon.co.uk/dp/B07JGT17B8 (which is a very simple…
In an attempt to make the Creality Ender 3 Pro as quiet as possible, I figured the endstop switch clicking noises made during homing needed to go. It's important to note that I've installed a Creality V4.2.7 board as well as a BLTouch (so…
This optical breadboard is a low-cost alternative to aluminum breadboard. It is meant for budget labs, start-ups, teaching, demonstrations etc. Inspired by a metric version openOptics breadboards , but I needed imperial ¼" threads. The…
Optical post holder for 12 mm or 1/2 inch diameter optical posts. Thread holes are modeled, compatible with metric M6 threads and bolts. Print with 0.10 mm layer heights for at least where the threads are for best thread hole quality.…
This is Anycubic Kossel+ mount and flag for Trianglelab optical endstop: https://trianglelab.net/products/tl-limit
I wasn't especially happy with the stock mechanical switch solution on this printer, so I bought a couple of these: https://bit.ly/2maUa3B and started designing the mounts you see here. This replaces the Y axis stepper mount ACM part and…
A mount to fit on the battery rails of the Holybro X500V2. I made it for my Micoair MTF-01 Optical Flow, but it could work with anything. Printed in PLA. There's little holes for zip ties to lock it on the tubes but my print came out…
