GPIO Extender for Voron Skirt Buttons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes wiring skirt buttons a little easier
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I was adding some skirt push buttons to my Voron and found I had a wiring challenge. I wired all the button to a gpio ground pin (common to all buttons) and another wire to the button's individual gpio pin. But then I could no longer remove the buttons without cutting wires.
My solution was this little gpio breakout/extender. Fitting 6 JST PH (2.0) 2p sockets, you then just need a 2pin JST plug on each button assembly and you can fit them individually
Recommend 24/26/28 awg wire. One shared ground wire
GPIO pin numbers on the side of the case, useful so long as you actually wire the right socket to the right pin
(my preferred button model is below)